7''Large Touch Screen 12 Leads Sync collection ECG EKG Machine thermal printing

7''Large Touch Screen 12 Leads Sync collection ECG EKG Machine thermal printing. E6 is a kind of electrocardiograph, which is able to sample 12 leads ECG signals simultaneously and print out the ECG waveform with thermal printing system. Its functions are as follows: recording and displaying ECG waveform in auto/manual mode; measuring ECG waveform parameters automatically, and automatic analysis and diagnosis; pacing ECG detection; prompt for electrode-off and out of paper; optional interface languagesChinese/English, etc.

; built-in lithium battery, powered either by AC or DC; arbitrarily select the rhythm lead to conveniently observe abnormal heart rhythm; case database management, etc. 1 Adopt 7'' high-resolution color LCD, operate by touch screen and function buttons, convenient to use.

2 Sync collection for 12-lead ECG, support routine 12-lead and Cabrera-lead waveform display. Get high-quality ECG waveform via AC filter, DFT filter, EMG filter and Low-pass Filter of ECG signal. 3 Display 3/6/12 - lead ECG waveform, print mode, sensitivity, paper speed, filter status, etc. On one screen, convenient for contrastively diagnosing. 4 Power supply: AC/DC (which can adapt AC 50/60Hz), with built-in rechargeable lithium battery, charging circuit, perfect over-current and over-voltage protection circuit. 5 Support for auto 112, auto 26, auto 26+1, auto 34, auto 34+1, auto 43, auto 43+1, auto 62, auto 62+1, rhythm 7, rhythm 6, rhythm 5, rhythm 4, rhythm 3, rhythm 2 and manual.

The printed content contains time, calibration signal, filter status and patient's information. Information including printed waveform length, output measurement parameters, diagnostic conclusion, superposition QRS wave, histogram, trend chart, interval list, can be set, and with time print function, which meets different requirements. 6 With the functions of auto-measurement and auto-interpretation for routine ECG parameters, provide measurement results for HR, PR interval, P Duration, QRS Duration, T Duration, QT/QTc interval, P/QRS/T Axis, R(V5), S(V1) and R(V5)+S(V1), etc. And auto-diagnosis conclusion, which reduces the doctor's burden. 7 Rhythm lead can be selected freely, convenient to observe abnormal heart rhythm.

8 The subject's clinical information such as, ID, Name, Age, Sex, Height, Weight, etc. 9 1000 cases (3 s case is frequently used) can be stored by the built-in memory, convenient for case review and statistic.

10 In optimal DC state, up to 10-hour standby time, continuous print for more than 3-hour and print up to 1000 ECG waveform (3 s case is frequently used). 11 Multi-language Chinese, English, Turkish, Portuguese, German, Russian and Kazakh, etc. 12 External printer and USB storage device can be connected. Input way: Floating and defibrillation protection. Input impedance: =100 MO(1Hz).

Frequency response: 0.01Hz300 Hz(-3dB). Filter: AC Filter(AC50/60 Hz), EMG Filter 25 Hz/35 Hz (-3 dB), DFT Filter, Low-pass Filter. Recording way: Thermal printing system. Specification of recording paper: 110 mm(W)×20 m(L) high-speed thermal paper.

Time base selection(paper speed): 5 mm/s, 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s, 100 mm/s, error: ±5% within 0.2s~2.0s. Gain control(sensitivity): 2.5? 20/10 mm/mV, accuracy is ±5%; Standard sensitivity: 10 mm/mV±0.2 mm/mV.

Auto record: record setup according to auto record format and mode, automatically change leads, automatically measure and analyze. Rhythm record: record setup according to rhythm record format and mode, automatically measure and analyze.

Manual record: record according to manual record format. Measurement parameters: HR, PR interval, P Duration, QRS Duration, T Duration, QT/QTc interval, P/QRS/T Axis, R(V5), S(V1) and R(V5)+S(V1) amplitude. Product safety type: Class I type CF defibrillation-proof applied part. Polarization resistance voltage: ±950 mV.

ECG signal input sampling frequency: 32 kHz. Waveform data processing sampling frequency: 1 kHz. The minimum detection signal: 10 Hz, 20 µV(peak-peak value) deflected sinusoidal signal can be detected. Pacing detection channel: all leads. Accuracy of input signal: ±5%.

DC: 7.4V/5000mAh rechargeable lithium battery. Degree of protection against ingress of liquid: IPX0. Atmospheric pressure: 700 hPa1060 hPa.

Atmospheric pressure: 500 hPa1060 hPa. Dimension: 315mm(L)×200mm(W)×92mm(H). (hereinafter referred to as CONTEC) focusing on research, manufacture and distribution of medical instruments, was founded in 1996 as a high-tech company. CONTEC locates in Economic & Technical Development Zone in Qinhuangdao covered an area of 125 acres and building area of over 100000 square meter, which is one of the largest bases for R & D and production of medical devices in China.

Contec hopes to cooperate with internatio. Nal companies to supply more innovative design and advanced. We sincerely welcome you to become one of our global partners. We are looking forward to establishing a successful business relationship with you.

This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\ECG & EKG Machines". The seller is "madeincontec" and is located in this country: CN. This item can be shipped worldwide.

Number of Channels: Six Channel
ECG & EKG Machine Type: Electrocardiograph
Number of Leads: 12 Leads
Model: E6
Country/Region of Manufacture: China
screen: Adopt 7'' high-resolution color LCD
Size: 315 mm (length) × 215 mm (width) × 92 mm (height)
Bundle Listing: Yes
MPN: 69450401
Brand: CON-TEC